CLIMMA^®
 Marine Air Conditioning
 

- NEW -
Series Compact 7, 10, 12, 16

Stainless steel base & brackets for long life in the harsh marine environment.
Four model sizes for single or multiple unit installations.
Quiet, high efficiency Carrier rotary compressors with low starting torque & current draw.
Systems pre-charged with R417A refrigerant, no special tools or expertise needed.
Quiet, powerful EBM blowers designed to simplify ducted installations.
Blower discharge easily set to any angle from horizontal to vertical.
Deep condensate pans with 2 available drains & plastic liner.
Reverse cycle heat (heat pump) standard, electric heat available by special order.
Multi function, user programmable digital controls with humidity setting, auto fan, etc., for precise
climate control.
Sea water pumps of various capacities dependent on unit size Pump relay available for one pump,
multiple unit installations.
Wide range of duct & ducting components for flexible, efficient installations.
Extensive selection of wood, plastic, and aluminum grills to match any interior & decor.

Call for a price quote 419.299.3862 on this and all CLIMMA Marine Air Conditioning products.
First Mate's Cabin won't be beat!

CLIMMA
MARINE AIR CONDITIONING Presents:

Another quality product from Climma; suppliers of climate control systems from 7,000 to 700,000 Btu/h to quality boat builders including: Amel, Beneteau, Cantieri di Pisa, Danyard, Hallberg Rassy, Jeanneau, Jongert, Royal Huismann, Uniesse, Fountaine Pajot. Control panel Uega Mk II. (shown below)

VEGA Mk II Control

Design
The Climma VEGA Mk II digital marine air conditioning control Display Panel can be easily installed in frames from all leading switch panel manufacturers, including Euroliving, Tecino Tech, Tecino Light, Tecino Matix, Vimar, Gewiss, ABB and AVE. The unobtrusive but multi-functional display can accept a wide variety of interchangeable bezels that match and complement light switches, other controls, and the decor chosen by the interior designer or naval architect. A hand-held Remote Control is available for convenient operation and control of basic functions.

Application
The Climma VEGA Mk II is easily initialized by the installer for use on the following types of Climma systems.
  • Direct Expansion (DX) - Compact (self-contained) or Split.
      Either Cool Only, Reverse Cycle, or with Electric Heat.
  • Tempered Water (Chiller) - Fan Coils.
     Either Fan Only, with Water Valve, or with Water Valve and Electric heat.
Thanks to the networking feature, several Fan Coils or Cabin/Split units in a large area can be controlled from a single VEGA Mk II control. Each VEGA Mk II control may be connected to a ships systems monitor using the Modbus connection.

Features
Display Panel - All functions, adjustments, and advanced program functions can be accessed from the Display Panel. A four-stage dimmer allows display intensity to be lowered in low-light situations. The three segment display shows cabin temperature, Set Point, alarm codes, operational mode, etc., while LED's show fan speed, system operating mode, and alarm status. With the system "Off', cabin temperature is displayed on the Display Panel. The Display can be set to work in Celsius or Fahrenheit

Temperature Sensing - This is accomplished in one of two ways.
  • Sensor on Display Panel - This is the preferred sensor. Very accurate, but can be calibrated by operator if required.
  • Remote Sensor - If the sensor on the Display Panel is affected by air blowing onto it, behind it, or if sunlight or some other heat source renders false readings, a Remote Sensor can be installed that will override the sensor on the Display Panel. The Remote Sensor can be installed in the return-air flow or in a free air space in the cabin. The Remote Sensor can be calibrated by the operator if required.

Call for a price quote 419.299.3862 on this and all CLIMMA Marine Air Conditioning products.
First Mate's Cabin won't be beat!